€ 25.99

Document in winkelwagen

COMPUTER AIDED MANUFACTURING 1 ACTUAL AND PRACTICE EXAM WITH COMPLETE QUESTIONS AND VERIFIED CORRECT SOLUTIONS/A GRADE

List the machining parameters affecting tool life. - ANSWER Depth of Cut, Feed per
tooth, and Cutting Speed
Describe the effect of the following on tool life including any sketches you deem
necessary - ANSWER a. Depth of Cut (Smaller cut means a longer tool life, Increasing
Depth by 50% typically decreases tool life by 15%.Usually advantageous trade off)
b. Feed Rate (The faster the feed, the more wear will occur on the tip of the tool; lower
feed to increase tool life. Typically, feed increase of 50% causes 60% reduction in tool
life. Not an advantageous trade off)
c. Speed (Tool life is extremely sensitive to the cutting speed, Higher speed means a
lower tool life. Cutting speed increase causes higher temperatures on the tool tip. A 50%
increase in speed will cause a 90% reduction in tool life. Not an advantageous trade off)
Arrange the following parameters in order of their effect on tool life from the highest to
the lowest: Depth of cut, feed rate, speed. - ANSWER Feed Rate, Cutting Speed, Depth
of Cut

Preview document (1 van de 9 pagina's)

Unlock document

Download alle 9 pagina's voor € 25,99

Document in winkelwagen

Document rapporteren

Document rapporteren

Voordelen van Knoowy

€ 25,99

Document in winkelwagen

Niet tevreden? Geld terug
Document direct te downloaden
€ 0,50 korting bij betalen met saldo
Ontvang gratis oefenvragen bij document

Specificaties

Niveau: University
School: Open University
Opleiding: Engineering
Document
Rubriek: Tentamens
Gemaakt op: 26-07-2024
Type: .pdf
Pagina's: 9
Taal: English
Tags
COMPUTER AIDED MANUFACTURING 1 ACTUAL AND PRACTICE EXAM WITH COMPLETE QUESTIONS AND VERIFIED CORRECT SOLUTIONS/A GRADE

Verkoper

71 documenten geüpload

1 documenten verkocht

Im an excellent tutor providing best revision materials ie EXAMS,NOTES,ESSAY,TEST BANKS for all NURSING and MEDICAL proffesionals.

BEST OF LUCK,

Verdienen aan je samenvattingen?

Maak je zelf samenvattingen of heb je nog uitgewerkte opdrachten liggen? Upload je documenten dan op Knoowy en verdien geld.

Document uploaden

Meer aanbevolen documenten ›

ENGINEERING MECHANICAL VIBRATIONS ACTUAL FINAL AND PRACTICE EXAM WITH QUESTIONS AND VERIFIED CORR
Door MIKEBEST op 26-07-2024
€ 31,99 18 pagina's

** An MOV burns out, you replace it but cannot read voltage or resistance. What should you do? - ANSWER Replace it with a larger one (630) * On a Ward-Leonard circuit, the brake is set but the motor is trying to slip through the brake. What circuit is th...
Open University / Engineering /

** An MOV burns out, you replace it but cannot read voltage or resistance. What should you do? - ANSWER Replace it with a larger one (630) * On a Ward-Leonard circuit, the brake is set but the motor is trying to slip through the brake. What circuit is th...
Open University / Engineering /

€ 31,99 18 pagina's
POWER PLANT-ENGINE ACTUAL EXAM WITH 120 MULTIPLE CHOICES QUESTIONS AND VERIFIED SOLUTIONS(EXPLANA
Door MIKEBEST op 26-07-2024
€ 35,99 45 pagina's

1. Which condition would be the least likely to be caused by failed or failing engine bearing? A- Excessive oil consumption. B- High oil temperatures. C- Low oil temperatures. - ANSWER C- Low oil temperatures. All of the alternatives except tow oil temper...
Open University / Engineering /

1. Which condition would be the least likely to be caused by failed or failing engine bearing? A- Excessive oil consumption. B- High oil temperatures. C- Low oil temperatures. - ANSWER C- Low oil temperatures. All of the alternatives except tow oil temper...
Open University / Engineering /

€ 35,99 45 pagina's
POWER ENGINEERING PRACTICE2024/25 ACTUAL EXAM WITH COMPLETE 100 QUESTIONS AND VERIFIED CORRECT AN
Door MIKEBEST op 26-07-2024
€ 28,99 16 pagina's

Two canadadian codes which have been adopted by all canadian jurisdictions and which are of importance to fifth class power engineering are the: - ANSWER CSA B51 And B52 The ASME code sections which are most pertinent to Fifth and Fourth class power engi...
Open University / Engineering /

Two canadadian codes which have been adopted by all canadian jurisdictions and which are of importance to fifth class power engineering are the: - ANSWER CSA B51 And B52 The ASME code sections which are most pertinent to Fifth and Fourth class power engi...
Open University / Engineering /

€ 28,99 16 pagina's
CHEMICAL ENGINEERING THERMODYNAMICS 2024 ACTUAL EXAM WITH 500+ PRACTICE QUESTIONS AND VERIFIED CO
Door MIKEBEST op 26-07-2024
€ 36,99 152 pagina's

Isothermal - ANSWER Maximum work that could be secured by expanding the gas over a given pressure range is the __________ work. -isothermal -adiabatic -isentropic -none of these zero (Internal energy is a state function, cycling back to the initial state ...
Open University / Engineering /

Isothermal - ANSWER Maximum work that could be secured by expanding the gas over a given pressure range is the __________ work. -isothermal -adiabatic -isentropic -none of these zero (Internal energy is a state function, cycling back to the initial state ...
Open University / Engineering /

€ 36,99 152 pagina's

Meer aanbevolen documenten ›

Vakken van Engineering - Open University

Meer Engineering ›

(updated) epa 608 knowledge check 2024 with complete solutions | latest 2024/2025 amca phlebotomy az 104 renewal exam question and answers az 104 renewal exam question and answer updated 2022 az 104 renewal exam question and answers 2024 electrolysis ibec+laser state board practice elevator mechanic elevator mechanic exam epa 608 (core, type 1, 2 and 3) study guide with complete solutions | latest 2024/2025 epa 608 9th edition with complete solutions |latest 2024/2025 update epa 608 certification sample exam questions with verified answers | latest 2024/2025 epa 608 core 2024 test questions bank with correct answers | latest 2024/2025 epa 608 type 1 questions with verified answers | latest 2024/2025 epa 608 type 2 certification practice questions with complete solutions | latest 2024/2025 epa 608 type 2 exam questions with verified answers | latest 2024/2025 epa 608 type 3 questions with approved answers | latest 2024/2025 epa 608 type iii practice questions with approved answers | latest 2024/2025 epa 608 universal questions with approved solutions| latest 2024/2025 epa certification exam practice questions with verified answers | latest 2024/2025 hvac: epa 608 certification study guide with verified solutions | latest 2024/2025 test bank for business intelligence 2 2 nd edition Meer Engineering ›

Al meer dan 146.000 tevreden studenten

JadeVanBignoot

Knoowy is zeker aan te raden. Goedkoop en je krijgt meteen je document!
Naya

De website is gebruik vriendelijk, je krijgt meteen de samenvatting na de betaling. Aanbevolen!
RTNederland

Nadat ik Knoowy ontdekt heb, ga ik regelmatig op zoek naar eventuele bruikbare samenvattingen! Heel erg handig!
larbi

Een goede keuze voor samenvattingen. Je bespaart tijd en energie.
larbi

Een goede site voor samenvattingen en leren. Ik kan iedereen aanraden om deze site te gebruiken.
FCW

Handig te gebruiken bij het leren en er is veel aanbod op de website.
sterrevanlommel

Knoowy is heel handig om te gebruiken. Zeker aan te raden.
MathieuHaldermans

Bespaart héél veel opzoekwerk en stress ook zeer overzichtelijk en gebruiksvriendelijk.

Actie: ontvang 10% korting bij aankoop van 3 of meer items!

Actie: ontvang 10% korting bij aankoop van 3 of meer items!