2023 PA Appraisers License Exam with 100% Verified Correct Answers

2023 PA Appraisers License Exam
with 100% Verified Correct Answers

A technician has to adjust the hinged glass on a van.
Which of the following is an acceptable adjustment
method? - Correct Answer-BOTH: Shimming and
bending thehinge AND adjusting the fasteners.
Regarding sectioning: - Correct Answer-§ It should
never be performed in a crush zone
area, as this will change the crash characteristics of the
vehicle.
§ When using recycled parts, the parts should first be
checked for dimensional
accuracy.
Tolerance in terms of measurements can vary by as
much as 5mm on undamaged models. Can it be
acceptable to have a 5mm discrepancy on a control
point of any vehicle? - Correct Answer-Depends on the
vehicle. Any point on a vehicle should varyfrom spec no
more than ½ mm.
An Improperly applied epoxy primer can lead to -
Correct Answer-Sand scratch
swelling, color bleeding, and peeling.
A technician has to order a door skin. What is
included with the door skin? - Correct
Answer-Nothing else will be included.
A FWD vehicle was damaged in a collision with the right
front wheel taking most of the
impact. The estimate lists the replacement of the tire, wheel, steering knuckle, and
subframe. The CV-joint boot is not ripped. Should the
CV-joint be replaced? - Correct Answer-Possibly. The
condition of the boot is not an indication of damage to
the CVjoint.
A tram, tape, and centering gauges are being used to
quick reference a unibody vehicle.What should be used
to determine vehicle centerline? - Correct Answer-§
Centering gauges use centering pins to locate
centerline.
§ A tram is used to make point-to-point measurements.
Padded dashes can be repaired using: - Correct
Answer-§ Airless plastic welder
§ Adhesives
Damage to car's upper tie bar would be considered:
- Correct Answer-Structural
damage
What type of auto part might be found in a salvage yard?
- Correct Answer-LKQ or LikeKind-Quality
On a unibody vehicle, it is discovered that the driver's
door drops when opened.
A technician has to adjust the hinged glass on a van.
Which of the following is an acceptable adjustment
method? - Correct Answer-BOTH: Shimming and
bending thehinge AND adjusting the fasteners.
Regarding sectioning: - Correct Answer-§ It should
never be performed in a crush zone
area, as this will change the crash characteristics of the
vehicle.
§ When using recycled parts, the parts should first be
checked for dimensional
accuracy.
Tolerance in terms of measurements can vary by as
much as 5mm on undamaged models. Can it be
acceptable to have a 5mm discrepancy on a control
point of any vehicle? - Correct Answer-Depends on the
vehicle. Any point on a vehicle should varyfrom spec no
more than ½ mm.
An Improperly applied epoxy primer can lead to -
Correct Answer-Sand scratch
swelling, color bleeding, and peeling.
A technician has to order a door skin. What is
included with the door skin? - Correct
Answer-Nothing else will be included.
A FWD vehicle was damaged in a collision with the right
front wheel taking most of the
impact. The estimate lists the replacement of the tire, wheel, steering knuckle, and
subframe. The CV-joint boot is not ripped. Should the
CV-joint be replaced? - Correct Answer-Possibly. The
condition of the boot is not an indication of damage to
the CVjoint.
A tram, tape, and centering gauges are being used to
quick reference a unibody vehicle.What should be used
to determine vehicle centerline? - Correct Answer-§
Centering gauges use centering pins to locate
centerline.
§ A tram is used to make point-to-point measurements.
Padded dashes can be repaired using: - Correct
Answer-§ Airless plastic welder
§ Adhesives
Damage to car's upper tie bar would be considered:
- Correct Answer-Structural
damage
What type of auto part might be found in a salvage yard?
- Correct Answer-LKQ or LikeKind-Quality
On a unibody vehicle, it is discovered that the driver's
door drops when opened.